The Vinik AV system has two control panels. One is located on the left wall of the booth (pictured below), and the other is stage right near the audio rack. Press the button under "ON." You should see the projector and screen lowered into place and the projector should be on. This can take several minutes.

If this doesn't happen automatically, use the "proj lift up", "proj lift down", "screen up", and "screen down" buttons to raise/lower the projector and screen.

If you need an adaptor or cable, please contact the help desk

Ensure that the resolution is being optimized for the "Crestron" (projector) and that it is set to 1280 x 720. If it is set to a different resolution, make sure to change it to 1280 x 720.

Make sure that the Keynote being used is set to display a widescreen (16:9) slide size.

Note: If you would rather use a widescreen template as a starting point, click here or find the attachment at the bottom of this page.

**NOTE: To complete the next step, you will need to leave the booth (w/ the remote pictured below) and go down directly underneath the projector.

Use the zoom button specified in the screenshot below to maximize the zoom of the projector.